SMC Networks SMC6224M Before re-transmitting EAP packet, Supplicant-timeout- Supplicant timeout

AUTHENTICATION COMMANDS

Command Mode

Privileged Exec

Command Usage

This command displays the following information:

•Global 802.1X Parameters – Shows whether or not 802.1X port authentication is globally enabled on the switch.

•802.1X Port Summary – Displays the port access control parameters

for each interface, including the following items:

- Status – Administrative state for port access control.

-Operation Mode– Dot1x port control operation mode (page 4-109).

-	Mode	– Dot1x port control mode (page 4-108).
-	Authorized	– Authorization status (yes or n/a - not authorized).

•802.1X Port Details – Displays the port access control parameters for each interface, including the following items:

- reauth-enabled	– Periodic re-authentication (page 4-110).
- reauth-period	– Time after which a connected client must be
	re-authenticated (page 4-111).
- quiet-period	– Time a port waits after Max Request Count is
	exceeded before attempting to acquire a new
	client (page 4-111).
- tx-period	– Time a port waits during authentication session
	before re-transmitting EAP packet

	(page 4-112).
- supplicant-timeout– Supplicant timeout.
- server-timeout	– Server timeout.
- reauth-max	– Maximum number of reauthentication
	attempts.
- max-req	– Maximum number of times a port will
	retransmit an EAP request/identity packet to
	the client before it times out the authentication
	session (page 4-107).
- Status	– Authorization status (authorized or not).

-Operation Mode– Shows if single or multiple hosts (clients) can connect to an 802.1X-authorized port.

4-113