SMC Networks SMC6224M manual 168, Private Vlan Port Configuration

CONFIGURING THE SWITCH

Web – Click VLAN, Private VLAN, Port Configuration or Trunk Configuration. Set the PVLAN Port Type for each port that will join a private VLAN. Assign promiscuous ports to a primary or isolated VLAN. Assign host ports to a community or isolated VLAN. After all the ports have been configured, click Apply.

Figure 3-71 Private VLAN Port Configuration

CLI – This example shows the switch configured with primary VLAN 5 and secondary VLAN 6. Port 3 has been configured as a promiscuous port and mapped to VLAN 5, while ports 4 and 5 have been configured as a host ports and associated with VLAN 6. This means that traffic for port 4 and 5 can only pass through port 3.

Console(config)#interface ethernet	1/3
Console(config-if)#switchport mode	private-vlan promiscuous	4-211
Console(config-if)#switchport private-vlan mapping 5		4-213
Console(config-if)#exit	1/4
Console(config)#interface ethernet
Console(config-if)#switchport mode	private-vlan host	4-211

Console(config-if)#switchport private-vlan host-association 6 4-212Console(config-if)#exit

Console(config)#interface ethernet 1/5 Console(config-if)#switchport mode private-vlan host Console(config-if)#switchport private-vlan host-association 6 Console(config-if)#

3-168