SMC Networks SMC6224M manual Timeout login response, Login 4-16password-thresh4-20

COMMAND LINE INTERFACE

configuration file from a TFTP server. There is no need for you to manually configure encrypted passwords.

Example

Console(config-line)#password 0 secret

Console(config-line)#

Related Commands

login (4-16)password-thresh(4-20)

timeout login response

This command sets the interval that the system waits for a user to log into the CLI. Use the no form to restore the default.

Syntax

timeout login response [seconds] no timeout login response

seconds - Integer that specifies the timeout interval. (Range: 0 - 300 seconds; 0: disabled)

Default Setting

•CLI: Disabled (0 seconds)

•Telnet: 600 seconds

Command Mode

Line Configuration

Command Usage

•If a login attempt is not detected within the timeout interval, the connection is terminated for the session.

•This command applies to both the local console and Telnet connections.

•The timeout for Telnet cannot be disabled.

•Using the command without specifying a timeout restores the default setting.

4-18