SMC Networks SMC6224M manual Access-list ip, Syntax No access-list ip standard extended aclname

COMMAND LINE INTERFACE

Table 4-34 IP ACLs (Continued)

Command	Function	Mode	Page
show ip	Displays the rules for configured IP ACLs	PE	4-123
access-list
ip	Adds a port to an IP ACL	IC	4-123
access-group
show ip	Shows port assignments for IP ACLs	PE	4-123
access-group
map access-list	Sets the CoS value and corresponding output	IC	4-125
ip	queue for packets matching an ACL rule
show map	Shows CoS value mapped to an access list for	PE	4-126
access-list ip	an interface

access-list ip

This command adds an IP access list and enters configuration mode for standard or extended IP ACLs. Use the no form to remove the specified ACL.

Syntax

[no] access-list ip {standard extended} acl_name

•standard – Specifies an ACL that filters packets based on the source IP address.

•extended – Specifies an ACL that filters packets based on the source or destination IP address, and other more specific criteria.

•acl_name – Name of the ACL. (Maximum length: 16 characters)

Default Setting

None

Command Mode

Global Configuration

4-118