SMC Networks SMC6224M manual Statically Configuring a Trunk Command Usage, Command Attributes

Statically Configuring a Trunk

Command Usage

•When configuring static trunks, you may not be able to link switches of different types, depending on the manufacturer’s implementation. However, note that the static trunks on this switch are Cisco EtherChannel compatible.

PORT CONFIGURATION

statically configured

}

active links

•To avoid creating a loop in the

network, be sure you add a static trunk via the configuration interface

before connecting the ports, and also disconnect the ports before removing a static trunk via the configuration interface.

Command Attributes

•Member List (Current) – Shows configured trunks (Trunk ID, Unit, Port).

•New – Includes entry fields for creating new trunks.

-Trunk – Trunk identifier. (Range: 1-4)

-Unit – Stack unit.

(Range – SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4) - Port – Port identifier. (Range: 1-26/50)

3-95