SMC Networks SMC6224M manual Interface Commands

COMMAND LINE INTERFACE

Interface Commands

These commands are used to display or set communication parameters for an Ethernet port, aggregated link, or VLAN.

Table 4-40 Interface Commands

Command	Function	Mode	Page
interface	Configures an interface type and enters interface	GC	4-143
	configuration mode
description	Adds a description to an interface configuration	IC	4-143
speed-duplex	Configures the speed and duplex operation of a	IC	4-144
	given interface when autonegotiation is disabled
negotiation	Enables autonegotiation of a given interface	IC	4-145
capabilities	Advertises the capabilities of a given interface for	IC	4-146
	use in autonegotiation
flowcontrol	Enables flow control on a given interface	IC	4-147
shutdown	Disables an interface	IC	4-148
switchport	Configures the broadcast storm control	IC	4-149
broadcast	threshold
packet-rate
clear counters	Clears statistics on an interface	PE	4-150
show	Displays status for the specified interface	NE,	4-151
interfaces		PE
status
show	Displays statistics for the specified interfaces	NE,	4-152
interfaces		PE
counters
show	Displays the administrative and operational	NE,	4-154
interfaces	status of an interface	PE
switchport

4-142