SMC Networks SMC6224M manual 187, Igmp Configuration

MULTICAST FILTERING

Notes: 1. All systems on the subnet must support the same version.

2.Some attributes are only enabled for IGMPv2, including IGMP Report Delay and IGMP Query Timeout.

Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP settings as required, and then click Apply. (The default settings are shown below.)

Figure 3-82 IGMP Configuration

CLI – This example modifies the settings for multicast filtering, and then displays the current status.

Console(config)#ip igmp snooping		4-237
Console(config)#ip igmp snooping querier		4-241
Console(config)#ip igmp snooping query-count 10		4-241
Console(config)#ip igmp snooping query-interval 100		4-242
Console(config)#ip igmp snooping query-max-response-time 20		4-243
Console(config)#ip igmp snooping router-port-expire-time 300		4-244
Console(config)#ip igmp snooping version 2		4-238
Console(config)#exit
Console#show ip igmp snooping		4-239
Service status	: Enabled
Querier status	: Enabled
Query count	: 10
Query interval	: 100 sec
Query max response time : 20 sec
Router port expire time	: 300 sec
IGMP snooping version	: Version 2
Console#

3-187