SMC Networks SMC6224M manual Lacp Trunk Configuration

CONFIGURING THE SWITCH

•A trunk formed with another switch using LACP will automatically be assigned the next available trunk ID.

•If more than eight ports attached to the same target switch have LACP enabled, the additional ports will be placed in standby mode, and will only be enabled if one of the active links fails.

•All ports on both ends of an LACP trunk must be configured for full duplex, either by forced mode or auto-negotiation.

•Trunks dynamically established through LACP will also be shown in the Member List on the Trunk Membership menu (see page 3-96).

Command Attributes

•Member List (Current) – Shows configured trunks (Unit, Port).

•New – Includes entry fields for creating new trunks.

- Unit – Stack unit.

(Range – SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4) - Port – Port identifier. (Range: 1-26/50)

Web – Click Port, LACP, Configuration. Select any of the switch ports from the scroll-down port list and click Add. After you have completed adding ports to the member list, click Apply.

Figure 3-43 LACP Trunk Configuration

3-98