SMC Networks SMC6224M manual 207, Private Vlan Commands

VLAN COMMANDS

This section describes commands used to configure private VLANs.

Table 4-55 Private VLAN Commands

Command	Function	Mode	Page
Edit Private VLAN Groups
private-vlan	Adds or deletes primary, community, or	VC	4-208
	isolated VLANs
private-vlan association	Associates a community VLAN with a	VC	4-210
	primary VLAN
Configure Private VLAN	Interfaces
switchport mode	Sets an interface to host mode or	IC	4-211
private-vlan	promiscuous mode
switchport private-vlan	Associates an interface with a secondary	IC	4-212
host-association	VLAN
switchport private-vlan	Associates an interface with an isolated	IC	4-212
isolated	VLAN
switchport private-vlan	Maps an interface to a primary VLAN	IC	4-213
mapping
Display Private VLAN	Information
show vlan private-vlan	Shows private VLAN information	NE,	4-215
		PE

To configure primary/secondary associated groups, follow these steps:

1.Use the private-vlancommand to designate one or more community VLANs and the primary VLAN that will channel traffic outside of the community groups.

2.Use the private-vlan association command to map the community VLAN(s) to the primary VLAN.

3.Use the switchport mode private-vlancommand to configure ports as promiscuous (i.e., having access to all ports in the primary VLAN) or host (i.e., community port).

4.Use the switchport private-vlan host-association command to assign a port to a secondary VLAN.

4-207