SMC Networks SMC6224M manual Show ip interface, 250, All interfaces

COMMAND LINE INTERFACE

Command Usage

•This command issues a BOOTP or DHCP client request for any IP interface that has been set to BOOTP or DHCP mode via the ip address command.

•DHCP requires the server to reassign the client’s last address if available.

•If the BOOTP or DHCP server has been moved to a different domain, the network portion of the address provided to the client will be based on this new domain.

Example

In the following example, the device is reassigned the same address.

Console(config)#interface vlan 1 Console(config-if)#ip address dhcp Console(config-if)#end Console#ip dhcp restart Console#show ip interface

IP address and netmask: 192.168.1.54 255.255.255.0 on VLAN 1,

and address mode: DHCP. Console#

Related Commands

ip address (4-247)

show ip interface

This command displays the settings of an IP interface.

Default Setting

All interfaces

Command Mode

Privileged Exec

Example

Console#show	ip	interface
IP address and		netmask: 192.168.1.54 255.255.255.0 on VLAN 1,
and address	mode:		User specified.
Console#

Related Commands

show ip redirects (4-251)

4-250