LINK AGGREGATION COMMANDS

Example

The following shows LACP enabled on ports 11-13. Because LACP has also been enabled on the ports at the other end of the links, the show interfaces status port-channel 1 command shows that Trunk 1 has been established.

Console(config)#interface

ethernet 1/11

Console(config-if)#lacp

 

Console(config-if)#exit

ethernet 1/12

Console(config)#interface

Console(config-if)#lacp

 

Console(config-if)#exit

ethernet 1/13

Console(config)#interface

Console(config-if)#lacp

 

Console(config-if)#exit

 

Console(config)#exit

 

Console#show interfaces status port-channel 1

Information of Trunk 1

 

Basic information:

100TX

Port type:

Mac address:

00-00-e8-00-00-0b

Configuration:

 

Name:

Up

Port admin:

Speed-duplex:

Auto

Capabilities:

10half, 10full, 100half, 100full

Flow control status:

Disabled

Port security:

Disabled

Max MAC count:

0

Current status:

LACP

Created by:

Link status:

Up

Operation speed-duplex:

100full

Flow control type:

None

Member Ports: Eth1/11, Eth1/12, Eth1/13,

Console#

4-165

Page 413
Image 413
SMC Networks SMC6224M manual 165