SMC Networks SMC6224M Smtp Alert Commands, Following example shows sample messages stored in RAM

COMMAND LINE INTERFACE

Command Usage

This command shows the system and event messages stored in memory, including the time stamp, message level (page 4-59),program module, function, and event number.

Example

The following example shows sample messages stored in RAM.

Console#show		log ram
[5]	00:01:06	2001-01-01
	"STA root	change notification."
[4]	level: 6,	module: 6, function: 1, and event no.: 1
	00:01:00	2001-01-01
	"STA root	change notification."
[3]	level: 6,	module: 6, function: 1, and event no.: 1
	00:00:54	2001-01-01
	"STA root	change notification."
[2]	level: 6,	module: 6, function: 1, and event no.: 1
	00:00:50	2001-01-01
	"STA topology change notification."
[1]	level: 6,	module: 6, function: 1, and event no.: 1
	00:00:48	2001-01-01
	"VLAN 1 link-up notification."
	level: 6,	module: 6, function: 1, and event no.: 1
Console#

SMTP Alert Commands

These commands configure SMTP event handling, and forwarding of alert messages to the specified SMTP servers and email recipients.

Table 4-21 SMTP Alert Commands

Command	Function	Mode	Page
logging sendmail	SMTP servers to receive alert messages	GC	4-67
host
logging sendmail	Severity threshold used to trigger alert	GC	4-68
level	messages
logging sendmail	Email address used for “From” field of alert	GC	4-69
source-email	messages
logging sendmail	Email recipients of alert messages	GC	4-69
destination-email

4-66