SMC Networks SMC6224M manual Displaying Switch Hardware/Software Versions

BASIC CONFIGURATION

CLI – Specify the hostname, location and contact information.

Console(config)#hostname R&D 5		4-34
Console(config)#snmp-server location WC 9		4-137
Console(config)#snmp-server contact Ted		4-136
Console(config)#exit
Console#show system		4-82
System description: 24-Port 10/100Mbps Stackable Managed Switch
with 2 optional uplink modules
System OID string: 1.3.6.1.4.1.202.20.43
System information	0 days, 2 hours, 4 minutes, and 7.13
System Up time:
seconds	R&D 5
System Name:
System Location:	WC 9
System Contact	Ted
MAC address	00-30-F1-12-34-56
Web server:	enabled
Web server port:	80
Web secure server:	enabled
Web secure server port: 443
Telnet server:	enabled
Telnet port:	23
Jumbo Frame:	Disabled
POST result

DUMMY Test 1.................PASS

UART LOOP BACK Test..........PASS

DRAM Test....................PASS

Timer Test...................PASS

RTC Initialization...........PASS

Switch Int Loopback test.....PASS

Done All Pass.

Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version numbers for the main board and management software, as well as the power status of the system.

Field Attributes

Main Board

•Serial Number – The serial number of the switch.

•Number of Ports – Number of built-in RJ-45 ports.

•Hardware Version – Hardware version of the main board.

3-13