Samsung ML-3560 Series manual 3.10, Explanation, Using the Control Panel

Item	Explanation
	Values: Yes, No*
	You can set this item only when you set
Config	Netware to On. This item lets you select
Netware	whether or not you set the frame type
	parameter. Select Yes to select the frame
	type.
	If you select Yes, the IPX Frame Type
	option appears on the display.
	Values: Auto*, EN_8023, EN_II, EN_8022,
	EN_SNAP
	You can select this item only when you set
	Config Netware to Yes. This item lets you
	select the IPX frame type.
IPX Frame	• Auto: You can set the frame type
	automatically.
Type
	• EN_8023: Select this value to use the IEEE

802.3frame type.

•EN_II: Select this value to use the ETHERNET II frame type.

•EN_8022: Select this value to use the IEEE

802.2frame type.

•EN_SNAP: Select this value to use the SNAP frame type.

Reset	This item reboots the network interface card.
Network
	This item performs a simple reset and
Default Set	restores the factory default settings for the
	network configuration. This setting will only
	take effect after you have reset the printer.
Print Net CFG	This item print a page showing the network
	parameters you set.

3.10

Using the Control Panel