To print a file immediately:
You can print the print job you want immediately. In this case, the job currently printing is stopped and the selected job will be printed.
1Press the Menu button (
).
2Press the Enter button (
) when “Active Job” displays on the bottom line of the display.
3Press the scroll button (
or 
) until the file name appears on the display and then press the Enter button (
).
4If the job is secured with a password, “Input PIN” displays.
Press the Enter button (
).
You must enter the specified 
or 
) to enter the first digit and press
the Enter button (
). The cursor automatically moves to
the next digit position. Enter the 2nd, 3rd, and 4th digit in the same way.
5Press the scroll button (
or 
) until you see “Func Release” on the display. The Select Function Release option appears only when you select Delay in the Print Mode option. See “Storing a Job” on page 9.5
6Press the Enter button (
).
If you enter incorrect password, “Input PIN” appears again. Reenter the correct password.
Printing using the form files
1In ready mode, press the scroll button (
or 
) until you see "Setup" on the bottom line of the display. Press the Enter button (
) to access the menu.
2Press scroll button (
or 
) until you see "Form Menu" on the bottom line of the display. Press the Enter button (
) to access the menu.
3Select one among three menu "Off", "Single Form", "Double Form". Then, Press Enter button (
).
4Press the Upper Level button (
).
5If you selected "Single Form", press right button. Then you can see "Sel. 1st. Form" menu, and then press Menu button (
).
6Press the scroll button (
or 
) until the form name appears on the display and then press the Enter button (
).
7Press the Upper Level button (
).
8If you selected "Double Form", press right button. Then you can see "Sel. 2nd. Form" menu, and then press Menu button (
).
9Press the scroll button (
or 
) until the form name appears on the display and then press the Enter button (
) for even page.
10Press the Upper Level button (
) to return to ready mode. If you selected "Single Form", the selected form will be applied to every page. If you selected "Double Form", 1st form will be applied to odd page and 2nd page will be even page.
Installing an Optional Tray 2
You can increase the paper handling capacity of your printer by installing an optional Tray 2. This tray holds 500 sheets of paper.
The optional Tray 2 consists of two components; the support unit and paper tray.
Support Unit
Paper Tray
1Turn off the printer and unplug all cables from the printer.
2Remove the packing tape and the packing material inside of the tray.
9.7
