Samsung ML-3560 Series manual To load paper in the Multi-Purpose Tray

•To prevent paper jams, do not add paper when there is still paper in the Multi-Purpose Tray. This also applies to other types of print materials.

•Print materials should be loaded face up with the top edge going into the Multi-Purpose Tray first, and be placed on the center of the tray.

•Do not place objects on the Multi-Purpose Tray. Also avoid pressing down or applying excessive force on it. The Multi-Purpose Tray may fall apart from the printer.

To load paper in the Multi-Purpose Tray:

1Pull the Multi-Purpose Tray down towards you.

2Pull the extender to extend the Multi-Purpose Tray to hold longer paper.

3If you are using paper, flex or fan the edge of the paper stack to separate the pages before loading.

For transparencies, hold them by the edges and avoid touching the print side. Oils from your fingers can cause print quality problems.

4Load the print material on the center of the tray with the print side up.

If you want to print on previously printed paper from the Multi-Purpose Tray, the printed side should be facing down with an uncurled edge to the printer. If you experience problems with paper feeding, turn the paper around.

NOTE: Make sure that you have not loaded too much print material. The print material buckles if you load a stack that is too deep or if you push it in too far.

5Squeeze the paper width guide and slide it to the edge of the print material without causing it to bend.

4.3 Using Print Materials