Samsung ML-3560 Series manual Line/Continue button

Message	Status	Do this...
Engine Fuser	The temperature in the	Unplug the power cord and
Low Heat Error	fuser is abnormally low.	plug it in again. If the
		problem persists, call for
		service.
Engine Fuser	The temperature in the	Unplug the power cord and
Over Heat Error	fuser is abnormally high.	plug it in again. If the
		problem persists, call for
		service.
Engine Hsync	There is a problem in	Turn off and then on the
Error	your printer engine.	printer.
Engine LSU Error	A problem has occurred	Unplug the power cord and
	in the LSU (Laser	plug it in again. If the
	Scanning Unit) in the	problem persists, call for
	printer.	service.
Initialize	The printer is now	Wait until your printer turns
System	turning on.	on completely.
Load Manual	The Multi-Purpose Tray	Load a sheet of print
Press Cont Key	is empty in manual feed	material and press the On
	mode.	Line/Continue button.
		You need to press the
		button each page to be
		printed.
Load	The paper size specified	Load the correct paper in
[Size] In [Tray]	in the printer properties	the tray.
	does not match the
	paper you are loading.
Memory Overflow	The printer does not	The job will be
	have enough memory to	automatically cleared and
	print the current job.	the printer will return to
		ready mode.
		Expand the memory in your
		printer. See“Installing
		Memory DIMM” on
		page 9.1.
Menu	The Menu button is	Use the printer features.
	pressed.
Offline	The printer is off-line	Press the On Line/
	and cannot print.	Continue button.
Outbin Full	The output tray is full.	It can hold up to 250 sheets
		of paper. Once the paper is
		removed from the output
		bin, the printer resumes
		printing.

Message	Status	Do this...
Page Too Complex	Too complicated data	Simplify the page layout
	was sent to the printer.	and remove unnecessary
		graphics from your
		document.
		If the message persists,
		expand the memory in your
		printer. See “Installing
		Memory DIMM” on
		page 9.1.
Paper Empty	The displayed tray is	Load the corresponding size
[Size] In [Tray]	empty.	of paper into the tray.
Paper Jam 0	A paper jam occurs in	Remove the jammed paper
	the paper feed area.	from the tray in use,
		referring to page 7.4.
Paper Jam 1	A paper jam occurs	Remove the jammed paper
	around the toner	from the printer, referring
	cartridge.	to page 7.6.
Paper Jam 2	A paper jam occurs in	Remove the jammed paper
	the paper exit area.	from the output tray,
		referring to page 7.7.
Load Manual	The paper size specified	Load the correct paper and
Press Cont key	in the printer properties	press the On Line/
	does not match the	Continue button.
	paper you are loading.
Printing xxx	The printer is printing	Complete your printing.
(xxx: Emulation)	jobs using the displayed
	language.
Ready	The printer is on-line	Use your printer.
	and ready to printer.
Ready	The Tray 1 is open but	Close the Tray 1 to clear the
Close Tray 1	there is paper in the	message.
	Multi-Purpose Tray.
Ready	The optional Tray 2 is	Close the optional Tray 2 to
Close Tray 2	open but there is paper	clear the message.
	in the Multi-Purpose
	Tray.
Ready IP Conflict	An IP address conflicts	Contact your network
	with other devices on	administrator and choose
	the network.	an address within your
		subnet which will not
		conflict with any other
		devices.
Ready	The toner cartridge in	Redistribute the toner,
Low Toner	your printer is nearly	referring to page 6.2.
	empty.

7.11 Solving Problems