Using Your Printer with a Macintosh | Samsung ML-3560 Series

8 Using Your Printer with a Macintosh

Your machine supports Macintosh systems with a built-in USB interface or a 10/100 Base-TX network interface card. When you print a file from a Macintosh computer, you can use the PostScript driver by installing the PPD file.

NOTE: Some printers do not support a network interface. Make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User’s Guide.

This chapter includes:

•Installing Software for Macintosh

•Setting Up the Printer

•Printing

Installing Software for

Macintosh

The PostScript driver CD-ROM that came with your machine provides you with the PPD file to use the PS driver, Apple LaserWriter driver, for printing on a Macintosh computer.

Verify the following before you install the printer software:

	Item	Requirements

	Operating system	Mac OS 8.6 ~ 9.2/10.1 or hihger

	RAM	Mac OS 8.6~9.2	64 MB

		Mac OS 10.1 or hihger	128 MB
		Mac OS 10.1 or hihger	128 MB

	Free disk space	200 MB

	Connection	USB interface, Network interface

1Connect your machine to the computer using the USB cable or the Ethernet cable.

2Turn on your computer and the machine.

3Insert the PostScript driver CD-ROM which came with your machine into the CD-ROM drive.

4Double-click the Samsung_LBP on your Macintosh desktop.

5Double-click the Installer folder.

6For Mac OS 8.6~9.2, double-click the Samsung_LBP Installer Classic icon.

For Mac OS 10.1 or higher, double-click the Samsung_LBP Installer OSX icon.

7Click Continue.

8Click Install.

9After the installation is finished, click Quit.

35

Using Your Printer with a Macintosh

Image 117

Samsung ML-3560 Series manual Using Your Printer with a Macintosh, Installing Software for Macintosh, Mac OS 10.1 or hihger

Contents

Page Page 0800-124-421 Samsung 7267864Samsung 800-10-7267 Contents Printing a Document Canceling a Print Job Using Print Materials Using Your Printer on a Network Important Precautions and Safety Information Environmental and Safety ConsiderationOzone Safety Recycling Power SaverRadio Frequency Emissions United States of America Wireless Guidance European States qualified under wireless approvalsDeclaration of Conformity European Countries Regulatory Compliance Statements Wires in the mains lead have the following color code Replacing the Fitted Plug for UK OnlyNeutral Introduction Special FeaturesPrint with excellent quality and high speed Handle paper flexibly Features Printer Features Front View Rear View Printer Components Unpacking Setting Up Your PrinterQuick Guide Components may differ from one country to another Selecting a Location Installing the Toner CartridgeClearance Space Open the top cover. Pull up on the handle to open the cover Setting Up Your Printer Loading Paper Changing the Size of the Paper in the Paper Tray Using a Parallel Cable Connecting a Printer CableUsing a USB Cable For Local Printing Using a Network Antenna Using an Ethernet CableTurning the Printer On Printing a Demo Using the Toner Save Mode Installing Printer SoftwareChanging the Display Language Understanding the Control Panel Using the Control PanelDisplay Message Description Accessing Control Panel Menus Using Control Panel MenusButtons Button Description Overview of Control Panel Menus Information MenuExplanation Paper Menu Layout Menu Setup Menu Graphics MenuPrinter Menu PCL Menu EPSON/IBM Menu PostScript Menu Network Menu Config Netware to Yes. This item lets you You can select this item only when you setThis item performs a simple reset Select the IPX frame type Choosing Paper and Other Materials Using Print MaterialsSizes and Capacities Guidelines for Paper and Special Materials Using the Multi-Purpose Tray Using the Tray 1 or the Optional Tray To load paper in the Multi-Purpose Tray Using the Manual Feed Mode Printing to the Output Tray Face down Selecting an Output LocationPrinting to the Rear Cover Face up On Line/Continue button Printing on Envelopes Printing on Special Print MaterialsTo open the rear cover Guidelines Printing on Labels Printing on Transparencies Printing on Card Stock or Custom- sized Materials Printing on Preprinted Paper Printing a Document Canceling a Print Job Canceling a Print JobBasic Printing Printing a Document Maintaining Your Printer Printing a ConfigurationPrinting Information Pages Printing Usage Maintaining the Toner Cartridge Checking the Toner RemainsRedistributing Toner Replacing the Toner Cartridge Maintaining Your Printer Cleaning the Outside of the Printer Cleaning the PrinterCleaning the Inside of the Printer Cleaning the Inside of the Printer Manually Maintenance Parts Printing a Cleaning SheetItems Yield Average Troubleshooting Checklist Solving ProblemsCheck Solution Line/Continue Problem Possible Cause Solution Solving General Printing Problems Advanced Options window Paper Feed Area Paper Jam Clearing Paper JamsMessage Location of Jam Go To Tray Paper Jam Optional Tray 2 Paper Jam Around the Toner Cartridge Paper Jam Multi-Purpose Tray Paper JamOpen the Multi-Purpose Tray Paper Exit Area Paper Jam Duplex Area Duplex Jam 1,2Duplex Area Duplex Jam Solving Print Quality Problems Problem SolutionTips for Avoiding Paper Jams Gray Vertical linesBackground Toner smear Message Status Do this Understanding Display Messages Continue button Line/Continue button Common Windows Problems Common Macintosh ProblemsProblem Possible Cause and Solution Common Linux Problems Common PS ProblemsProblem Possible Solution Cause Installed Defaults, to save on memory usage Am using BSD lprI am using Processed correctly. When going through Llpr to Printer Need to have a correct installation of the Samba Using Your Printer on a Network Setting Up a Network Connected PrinterAbout Sharing the Printer on a Network Requirements Configuring Network Parameters on the Control Panel Configuring IPX Frame Types Dynamic Addressing BOOTP/DHCP Rebooting the Network Interface Card Restoring the Network ConfigurationConfiguring the Wireless Network Hexadecimal Alphanumeric Installing Printer Options Precaution When Installing Printer OptionsInstalling Memory Dimm → change setting forVMOption → change memory 14Select the Samsung ML-3560 Series PS printerProperties Tips for using the Network Interface Card Installing a Network CardRemoving the Memory Dimm ML-3560 only ML-3560, ML-3561N ML-3561ND Installing the Hard Disk Using the Hard Disk Setting the time and date Printing with the Optional Hard DiskStoring a Job Deleting a Stored Job Printing a Stored JobControlling the Active Job Queue To delete a file from the queue Installing an Optional Tray Printing using the form filesTo print a file immediately Installing Printer Options Using the Control Panel Menu Installing a Duplex UnitPrinting on Both Sides of Paper From the Software Application Printer Specifications SpecificationsSpecifications and Description Printer Specifications Paper Specifications Tray Capacity Optional Dimensions Weight Paper SpecificationsOverview Supported Sizes of Paper Multi Dimensions Capacity Guidelines for Using PaperSymptom Problem with Solution Paper 10.3 Paper Output Capacity Paper SpecificationsPrinter and Paper Storage Environment Envelopes Labels TransparenciesType of Address Minimum Maximum Index Toner cartridge install Tips for avoiding 7.8 paper level indicator Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Software for Local Printing Installing Printer Software in WindowsTypical Installation Select Typical installation for a local printer. Click Next Custom Installation Select Custom installation. Click Next Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextChanging the Software Language Next Removing Printer Software Select your printer driver from the Name drop-down list Layout Tab Printer SettingsSelect Printers and Faxes Select your printer driver icon Orientation Source Paper Tab Resolution Image ModeToner Save Mode Graphics Tab Print and Hold Extras TabWatermark Overlay Using Help Using a Favorite SettingAbout Tab Printer Tab Printing Multiple Pages on One Sheet of Paper N-Up Printing Advanced Printing Printing Booklets Printing Posters None Printing on Both Sides of Paper Fitting Your Document to a Selected Paper Size Printing a Reduced or Enlarged Document Using an Existing Watermark Using WatermarksCreating a Watermark Click OK and start printing Advanced Printing What is an Overlay? Using OverlaysEditing a Watermark Deleting a Watermark Edit Overlay window, click Create Overlay Using a Page Overlay List box Click Delete Overlay Deleting a Page Overlay Advanced Using Windows PostScript Driver Setting Up a Client Computer Setting Up a Host ComputerSharing the Printer Locally Check the Share this printer box Opening the Troubleshooting Guide Using Smart PanelUnderstanding Smart Panel Toner Level Using Printer Settings Utility Changing the Smart Panel Program SettingsUsing Onscreen Help File System Requirements Using Your Printer in LinuxSupported OS Recommended Capacities Installing the Printer Driver Select Linux Printer and then Configuration Tool 10You can use the Settings tab and the Queue tab to viewChanging the Printer Connection Method From the Startup Menu icon at the bottom of the desktop Using the Configuration Tool Uninstalling the Printer DriverSelect Complete uninstall and then click Uninstall Changing Llpr Properties Installing Software for Macintosh Using Your Printer with a MacintoshMac OS 10.1 or hihger Click Continue For a Network-connected Macintosh Setting Up the PrinterFor a USB-connected Macintosh Mac OS 8.6 ~ Layout Setting Changing Printer SettingsPrinting Printing a Document Printing Multiple Pages on One Sheet of Paper Printer Features SettingReverse Duplex Fit to Duplex Printing Printer software install PostScript driver installingLanguage, change 10 Layout properties, set Orientation, print Windows Status monitor, use 28 system requirements Uninstall, software Linux 33 Windows Rev