Intel Desktop Boards D845EPT2 and D845EBG2 Product Guide
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation.
The location of the board’s BIOS configuration jumper is shown in Figure 11.
3 | 1 |
J8H2 | |
| OM13664 |
Figure 11. Location of the BIOS Configuration Jumper Block
The
Table 4. Jumper Settings for the BIOS Setup Program Modes (J8H2)
Jumper Setting
3 | 1 |
3 | 1 |
Mode
Normal (default)
Configure
Description
The BIOS uses the current configuration and passwords for booting.
After the
3 1
Recovery (None)
The BIOS recovers data from a recovery diskette in the event of a failed BIOS update.
30