Intel D845EBG2 manual BIOS Error Messages continued, Error Messages and Indicators, Explanation

Models: D845EBG2 D845EPT2

1 78
Download 78 pages 47.92 Kb
Page 73
Image 73
Error Messages and Indicators

Error Messages and Indicators

Table 35. BIOS Error Messages (continued)

Error Message

Memory Size Decreased

Memory Size Increased

Memory Size Changed

No Boot Device Available

Off Board Parity Error

On Board Parity Error

Parity Error

NVRAM / CMOS / PASSWORD cleared by Jumper

<CTRL_N> Pressed

Explanation

Memory size has decreased since the last boot. If no memory was removed, then memory may be bad.

Memory size has increased since the last boot. If no memory was added, there may be a problem with the system.

Memory size has changed since the last boot. If no memory was added or removed, then memory may be bad.

System did not find a device to boot.

A parity error occurred on an offboard card. This error is followed by an address.

A parity error occurred in onboard memory. This error is followed by an address.

A parity error occurred in onboard memory at an unknown address.

NVRAM, CMOS, and passwords have been cleared. The system should be powered down and the jumper removed.

CMOS is ignored and NVRAM is cleared. User must enter Setup.

73

Page 73
Image 73
Intel D845EBG2, D845EPT2 manual BIOS Error Messages continued, Error Messages and Indicators, Explanation