Intel Desktop Boards D845EPT2 and D845EBG2 Product Guide
Boot Device Priority Submenu
| Maintenance | Main | Advanced | Security | Power |
|
|
|
|
|
|
|
|
Boot |
| Exit |
|
|
|
|
|
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI
The submenu represented in Table 24 is for setting boot devices priority.
Table 24. Boot Device Priority Submenu
Feature
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
(Note 1)
Notes:
Options
•Removable Device
•Hard Drive
•ATAPI
•Intel® UNDI, PXE
•Disabled
Description
Specifies the boot sequence from the available types of boot devices. To specify boot sequence:
1.Select the boot device with <↑> or <↓>.
2.Press <Enter> to set the selection as the intended boot device.
The operating system assigns a drive letter to each boot device in the order listed. Changing the order of the devices changes the drive lettering. The default settings for the first through final boot devices are, respectively listed below. The BIOS supports up to sixteen total boot devices in any combination of the boot device types below, with respect to these maximums per type.
•Removable Device (maximum of four)
•Hard Drive (maximum of 12)
•ATAPI
•Intel UNDI, PXE (maximum of five) (Note 2)
The boot devices appear in order by type. For example, assume that the default boot order is preserved and that seven boot devices of the following types are installed on the system: two removable devices, two hard drives, two ATAPI
1.After the predefined boot device types (removable devices, hard drives, and ATAPI
2.While the predefined boot device types are individually listed in submenus by type, the BEV devices and SCSI
58