Intel D845EBG2 manual Peripheral Configuration Submenu continued, Using the Setup Program, Feature

Using the Setup Program

Table 13. Peripheral Configuration Submenu (continued)

Feature

Parallel Port

Mode

Base I/O Address (This feature is present only when Parallel Port is set to Enabled)

Interrupt

(This feature is present only when Parallel Port is set to Enabled)

DMA Channel

(This feature is present only when Parallel Port Mode is set to ECP)

Audio Device

LAN Device

(This feature is present only when there is onboard LAN)

Options

•Disabled

•Enabled

•Auto (default)

•Output Only

•Bi-directional (default)

•EPP

•ECP

•378 (default)

•278

•IRQ 5

•IRQ 7 (default)

•1

•3 (default)

•Disabled

•Enabled (default)

•Disabled

•Enabled (default)

Description

Configures the parallel port.

Auto assigns LPT1 the address 378h and the interrupt IRQ7.

An * (asterisk) displayed next to an address indicates a conflict with another device.

Selects the mode for the parallel port. Not available if the parallel port is disabled.

Output Only operates in AT†-compatible mode.

Bi-directionaloperates in PS/2-compatible mode.

EPP is Extended Parallel Port mode, a high-speed bi-directional mode.

ECP is Enhanced Capabilities Port mode, a high-speed bi-directional mode.

Specifies the base I/O address for the parallel port.

Specifies the interrupt for the parallel port.

Specifies the DMA channel.

Enables or disables the onboard audio subsystem.

Enables or disables the LAN device.

49