Using the Setup Program
Primary/Secondary IDE Master/Slave Submenus
Maintenance Main
| Advanced |
| Security |
|
|
|
|
Boot Configuration
Peripheral Configuration
IDE Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Power BootExit
➜Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary slave. Table 15 shows the format of these IDE submenus. For brevity, only one example
is shown.
Table 15. Primary/Secondary IDE Master/Slave Submenus
Feature
Drive Installed
Type
Maximum Capacity
PIO Mode
(Note)
Options
None
•None
•User
•Auto (default)
•
•ATAPI Removable
•Other ATAPI
•IDE Removable None
•Auto (default)
•Disabled
•Auto (default)
•0
•1
•2
•3
•4
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices. User allows capabilities to be changed.
Auto
Displays the capacity of the drive.
Sets the number of sectors to be transferred in a single interrupt.
Specifies the PIO mode.
Note: These configuration options appear only if an IDE device is installed.
continued
51