Intel D845EBG2, D845EPT2 manual To replace the battery, follow these steps

Installing and Replacing Desktop Board Components

To replace the battery, follow these steps:

1.Observe the precautions in “Before You Begin” (see page 21).

2.Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter).

3.Remove the computer cover.

4.Locate the battery on the board (see Figure 12).

5.With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note the orientation of the “+” and “-” on the battery.

6.Install the new battery in the connector, orienting the “+” and “-” correctly.

7.Replace the computer cover.

OM13663

Figure 12. Removing the Battery

35