Installing and Replacing Desktop Board Components
Installing and Removing the Desktop Board
Refer to your chassis manual for instructions on installing and removing the Intel desktop board.
WARNING
Only qualified technical personnel should do this procedure. Disconnect the computer from its power source before performing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage.
✏NOTES
You will need a Phillips† (#2 bit) screwdriver.
Refer to Appendix B for regulatory requirements and installation instructions and precautions.
Figure 5 shows the location of the eight mounting holes for the Desktop Board D845EBG2. The Desktop Board D845EPT2 has six mounting holes.
OM13668 |
Figure 5. Desktop Board D845EBG2 Mounting Holes
23
