Perle Systems SCS, STS manual Enable Data, Logging, Session Timeout

Serial Port Profiles

Enable Data	When enabled, serial data will be buffered if the TCP connection is lost. When
Logging	the TCP connection is re-established, the buffered serial data will be sent to its
	destination (this option is not available when Monitor DSR, Monitor DCD, or
	Multihost is enabled).
	The data buffer is 4K for desktop models and 32K for rack mount models. If
	the data buffer is filled, incoming serial data will overwrite the oldest data.
	Default: Disabled
Idle Timeout	Use this timer to close a connection because of inactivity. When the Idle
	Timeout expires, the IOLAN will end the connection.
	Range: 0-4294967 seconds (about 49 days)
	Default: 0 seconds so the port will never timeout
Session Timeout	Use this timer to forcibly close the session/connection when the Session
	Timeout expires.
	Default: 0 seconds so the port will never timeout
	Range: 0-4294967 seconds (about 49 days)
Dial In	If the device is remote and will be dialing in via modem or ISDN TA, enable
	this parameter.
	Default: Disabled
Dial Out	If you want the modem to dial a number when the serial port is started, enable
	this parameter.
	Default: Disabled
Dial Timeout	The number of seconds the IOLAN will wait to establish a connection to a
	remote modem.
	Range: 1-99
	Default: 45 seconds
Dial Retry	The number of times the IOLAN will attempt to re-establish a connection with
	a remote modem.
	Range: 0-99
	Default: 2
Modem	The name of the predefined modem that is used on this line.
Phone	The phone number to use when Dial Out is enabled.

125