211
Authentication

SecurID

Overview
If you need to reset the SecurID secret, select Tools, Reset, Reset SecurID Node Secret.
Field Descriptions
Configure the following parame ters:
Accounting
Secondary Host The secondary TACACS+ host that is used for accounting, should the primary
accounting TACACS+ host fail to respond.
Default: None
Accounting Port The port number that TACACS+ listens to for accounting requests.
Default: 49
Accounting Secret The TACACS+ shared secret is used to encrypt/decrypt TACACS+ packets in
communications between two devices. The shared secret may be any
alphanumeric string. Each shared secret must be configured on both client and
server sides.
Primary/Master
Host The first SecurID server that is tried for user authentication.
Default: None
Replica/Slave Host If the first SecurID server does not respond to an authentication request, this is
the next SecurID server that is tried for user authentication.
Default: None
UDP Port The port number that SecurID listens to for authentication requests.
Default: 5500
Encryption Type The type of encryption that will be used for SecurID server communication.
Data Options: DES, SDI
Default: SDI
s
Legacy If you are running SecurID 3.x or 4.x, you need to run in Legacy Mode. If you
are running SecurID 5.x or above, do not select Legacy Mode.
Default: Disabled