Perle Systems STS, SCS manual Remote Password, Configure Req, Timeout, Default 3 seconds, Retries

Serial Port Profiles

Remote Password	Complete this field only if you have specified PAP or CHAP (security
	protocols) in the Security field, and
	z you wish to dedicate this serial port to a single remote user, and this user
	will be authenticated by the IOLAN, or
	z you are using the IOLAN as a router (back-to-back with another IOLAN)
	Remote password means the following:
	z When PAP is specified, this is the password the IOLAN will use to
	authenticate the remote device.
	z When CHAP is specified, this is the secret (password) known to both ends
	of the link upon which responses to challenges will be based.
	Remote Password is the opposite of the parameter Password. Your IOLAN
	will only authenticate the remote device when PAP or CHAP is operating.
	Field Format: You can enter a maximum of 16 alphanumeric characters.
Routing	Determines the routing mode (RIP, Routing Information Protocol) used on the
	PPP interface.This is the same function as the Framed-Routingattribute for
	RADIUS authenticated users.
	Data Options
	z None—Disables RIP over the PPP interface.
	z Send—Sends RIP over the PPP interface.
	z Listen—Listens for RIP over the PPP interface.
	z Send and Listen—Sends RIP and listens for RIP over the PPP interface.
	Default: None
Configure Req.	The maximum time, in seconds, that LCP (Link Control Protocol) will wait
Timeout	before it considers a configure request packet to have been lost.
	Range: 1-255
	Default: 3 seconds
Configure Req.	The maximum number of times a configure request packet will be re-sent
Retries	before the link is terminated.
	Range: 0-255
	Default: 10 seconds
Terminate Req.	The maximum time, in seconds, that LCP (Link Control Protocol) will wait
Timeout	before it considers a terminate request packet to have been lost.
	Range: 1-255
	Default: 3 seconds
Terminate Req.	The maximum number of times a terminate request packet will be re-sent
Retries	before the link is terminated.
	Range: 0-255
	Default: 2 seconds
Configure NAK	The maximum number of times a configure NAK packet will be re-sent
Retries	before the link is terminated.
	Range: 0-255
	Default: 10 seconds

148 IOLAN SDS/SCS/STS User’s Guide, Version 3.6