Serial Port Profiles

Authentication Tab Field Descriptions

Configure the following parameters:

Authentication

The type of authentication that will be done on the link. You can use PAP or

 

CHAP to authenticate a serial port or user on the IOLAN, from a remote

 

location, or authenticate a remote client/device, from the IOLAN.

 

When setting either PAP and CHAP, make sure the IOLAN and the remote

 

client/device have the same setting. For example, if the IOLAN is set to PAP,

 

but the remote end is set to CHAP, the connection will be refused.

 

Data Options:

 

z None

 

z PAP—is a one time challenge of a client/device requiring that it respond

 

with a valid username and password. A timer operates during which

 

successful authentication must take place. If the timer expires before the

 

remote end has been authenticated successfully, the link will be

 

terminated.

 

z CHAP—challenges a client/device at regular intervals to validate itself

 

with a username and a response, based on a hash of the secret (password).

 

A timer operates during which successful authentication must take place.

 

If the timer expires before the remote end has been authenticated

 

successfully, the link will be terminated.

 

Default: CHAP

User

Complete this field only if you have specified PAP or CHAP (security

 

protocols) in the Authentication field, and

 

z you wish to dedicate this line to a single remote user, who will be

 

authenticated by the IOLAN, or

 

z you are using the IOLAN as a router (back-to-back with another IOLAN).

 

When Connect is set to Dial Out or both Dial In/Dial Out are enabled, the User

 

is the name the remote device will use to authenticate a port on this IOLAN.

 

The remote device will only authenticate your IOLAN’s port when PAP or

 

CHAP are operating. You can enter a maximum of sixteen alphanumeric

 

characters; for example, tracy201. When connecting together two networks,

 

enter a dummy user name; for example, DS_HQ.

 

Note If you want a reasonable level of security, the user name and password

 

should not be similar to a user name or password used regularly to login to the

 

IOLAN. External authentication can not be used for this user.

173

Page 173
Image 173
Perle Systems SCS, STS manual Authentication Tab Field Descriptions