GS700TP Smart Switch Software Administration Manual

Guest VLAN ID – Select the guest VLAN ID from the list of the currently defined VLANs.

2.Select Disable or Enable for the Port Based Authentication State in the provided field.

3.If you selected Enable for the Port Based Authentication State, then select the Authentication Method from the list in the provided field.

4.Select Disable or Enable for the Guest VLAN status in the provided field.

5.If you selected Enable for the Guest VLAN field, then select the VLAN ID from the list in the provided field.

6.Click Apply to update the device.

Port Authentication

The Port Authentication screen allows to configure port authentication interface parameters. To configure port-based authentication global properties:

1.Click Security > Port Authentication > Advanced > Port Authentication. The Port Authentication screen displays

Figure 6-7

Managing Security

6-11

v1.0, December 2007

Page 135
Image 135
NETGEAR GS700TP manual Port Authentication