![](/images/new-backgrounds/1193412/193412253x1.webp)
GS700TP Smart Switch Software Administration Manual
To configure RADIUS servers:
1. Click Security > Management Security > RADIUS. The RADIUS screen displays:
Figure
The RADIUS screen contains the following fields:
•Host IP Address – Enter the RADIUS Server IP address.
•Authentication Port – Enter the authentication port. The authentication port is used to verify the RADIUS server authentication. The authenticated port default is 1812.
•Number of Retries – Enter the number of transmitted requests sent to the RADIUS server before a failure occurs. Possible field values are
•Timeout for Reply – Enter the amount of time (in seconds) the device waits for an answer from the RADIUS server before retrying the query, or switching to the next server. Possible field values are
•Dead Time – Enter the default amount of time (in minutes) that a RADIUS server is bypassed for service requests. The range is
•Key String – Enter the default key string used for authenticating and encrypting all
•Usage Type – Select the RADIUS server authentication type. The default value is Login. The possible field values are:
–Login – The RADIUS server is used for authenticating user name and passwords.
–802.1X – The RADIUS server is used for 802.1X authentication.
–All – The RADIUS server is used for authenticating user names and passwords, and 802.1X port authentication.
Managing Security |
v1.0, December 2007