NETGEAR GS700TP manual Igmp Snooping Configuration, Interface Settings

GS700TP Smart Switch Software Administration Manual

To configure Basic IGMP Snooping:

1.Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP Snooping Configuration screen displays:

Figure 4-25

The Basic IGMP Snooping Configuration screen contains the following fields:

IGMP Snooping Configuration

•IGMP Snooping Status – Select the IGMP Snooping status on the device. The possible field values are:

–Enable – Enable IGMP Snooping on the device.

–Disable – Disable IGMP Snooping on the device.

Interface Settings

•VLAN ID – Displays the VLAN ID.

•Status – Select the IGMP Snooping status on the VLAN. The possible field values are:

–Enable – Enable IGMP Snooping on the VLAN.

–Disable – Disable IGMP Snooping on the VLAN.

2.Select the IGMP Snooping Status in the provided field.

3.Click Apply to update the device.

To configure IGMP Snooping on a VLAN:

1.Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP Snooping Configuration screen displays.

2.Select the VLAN ID entry in the Interface Settings table.

Configuring Switching Settings 4-35

v1.0, December 2007