GS700TP Smart Switch Software Administration Manual
–100M – The LAG is currently operating at 100 Mbps.
–1000M – The LAG is currently operating at 1000 Mbps.
•Duplex Mode – Displays the duplex mode of the LAG. The possible field value is:
–Full – The interface supports transmission between the device and its link partner in both directions simultaneously.
•Auto Negotiation – Select the auto negotiation status of the LAG. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by default. The possible field values are:
–Enable – Enable auto negotiation.
–Disable – Disable auto negotiation.
•Flow Control – Select the flow control status of the LAG. Operates when the port is in full duplex mode. Flow Control is disabled by default. The possible field values are:
–Enable – Enable flow control.
–Disable – Disable flow control.
2.Select the interface.
3.Enter or modify the fields in the first row.
4.Click Apply to update the device.
Configuring Switching Settings |
v1.0, December 2007
