GS700TP Smart Switch Software Administration Manual

Multicast Packets Received – Displays the number of good Multicast packets received on the interface since the device was last refreshed.

CRC & Align Errors – Displays the number of CRC and Align errors that have occurred on the interface since the device was last refreshed.

Undersize Packets – Displays the number of undersized packets (less than 64 octets) received on the interface since the device was last refreshed.

Oversize Packets – Displays the number of oversized packets (over 1518 octets) received on the interface since the device was last refreshed.

Fragments – Displays the number of fragments (packets with less than 64 octets, excluding framing bits, but including FCS octets) received on the interface since the device was last refreshed.

Jabbers – Displays the total number of received packets that were longer than 1518 octets. This number excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field range to detect jabbers is between 20 ms and 150 ms.

Collisions – Displays the number of collisions received on the interface since the device was last refreshed.

Frames of 64 Bytes – Displays the number of 64-byte frames received on the interface since the device was last refreshed.

Frames of 65 to 127 Bytes – Displays the number of 65 to 127 byte frames received on the interface since the device was last refreshed.

Frames of 128 to 255 Bytes – Displays the number of 128 to 255 byte frames received on the interface since the device was last refreshed.

Frames of 256 to 511 Bytes – Displays the number of 256 to 511 byte frames received on the interface since the device was last refreshed.

Frames of 512 to 1023 Bytes – Displays the number of 512 to 1023 byte frames received on the interface since the device was last refreshed.

Frames of 1024 to 1522 Bytes – Displays the number of 1024 to 1522 byte frames received on the interface since the device was last refreshed.

RMON Summary Statistics

Interface – Displays the port or LAG for which statistics are displayed.

Monitoring the Switch

7-13

v1.0, December 2007

Page 163
Image 163
NETGEAR GS700TP manual Rmon Summary Statistics