GS700TP Smart Switch Software Administration Manual
Log Filter
To configure log filters:
1.Click Monitoring > Logs > Log Filter. The Log Filter screen displays:
Figure
The Log Filter screen contains the following fields:
•RAM Logs – Select the minimum message severity level to appear in the RAM Log. The following are the available message severity levels:
–Emergency – The highest warning level. If the device is down or not functioning properly, an emergency log message is saved to the specified logging location.
–Alert – The second highest warning level. An alert log is saved, if there is a serious device malfunction; for example, all device features are down.
–Critical – The third highest warning level. A critical log is saved if a critical device malfunction occurs; for example, two device ports are not functioning, while the rest of the device ports remain functional.
–Error – A device error has occurred; for example, if a single port is offline.
–Warning – The lowest level of a device warning. The device is functioning, but an operational problem has occurred.
–Notice – Provides device information.
–Informational – Provides device information.
–Debug – Provides debugging messages.
•Log File – Select the minimum message severity level to appear in the log file. The following are the available message severity levels:
Monitoring the Switch |
v1.0, December 2007
