GS700TP Smart Switch Software Administration Manual

To configure Port PVID parameters:

1.Click Switching > VLAN > Advanced > Port PVID Configuration. The Port PVID Configuration screen displays:

Figure 4-15

The Port PVID Configuration screen contains the following fields:

Interface – Displays the interface id (port number or LAG number) to which the PVID tag is assigned.

PVID – Enter the PVID value. The possible field range is 1-4093.

2.Select an interface.

3.Enter the PVID in the provided field in the first row.

4.Click Apply to update the device.

4-20

Configuring Switching Settings

v1.0, December 2007

Page 86
Image 86
NETGEAR GS700TP manual To configure Port Pvid parameters