GS700TP Smart Switch Software Administration Manual
To configure SNMPv1/v2 trap station management:
1.Click System > SNMP > SNMPv1/v2 > Trap Configuration. The SNMPv1/v2 Trap Configuration screen displays:
Figure
The SNMPv1/v2 Trap Configuration screen contains the following fields:
•Recipients IP – Enter the IP address to which the traps are sent.
•Notification Type – (Configurable only if the Notification Version is SNMPv2.) Select the type of notification sent. The possible field values are:
–Traps – Traps are sent.
–Informs – Informs are sent only when SNMPv2 is enabled.
•Community String – Enter the community string of the trap manager.
•Notification Version – Select the trap type. The possible field values are:
–SNMPv1 – SNMP Version 1 traps are sent.
–SNMPv2 – SNMP Version 2c traps are sent.
•UDP Port – Enter the UDP port used to send notifications. The default UDP port is 162.
•Timeout – Enter the amount of time (in seconds) the device waits before
•Retries – Enter the amount of times the device
2.Select the trap entry.
3.Enter the fields in the first row.
4.Click Apply to update the device.
Managing System Settings |
v1.0, December 2007
