GS700TP Smart Switch Software Administration Manual
To configure CoS interface parameters:
1.Click QoS > CoS > Basic > CoS Interface Configuration. The CoS Interface Configuration screen displays:
Figure
The CoS Interface Configuration screen contains the following:
•Interface – Displays the interface for which the global QoS parameters are defined.
•Default CoS – Select the default CoS value for incoming packets for which a VLAN priority (VPT) is not defined.
•Restore Defaults – Restore the factory CoS default settings to the selected port. The possible field values are:
–Checked – Restore the factory CoS default settings to the ports.
–Unchecked – Maintain the current CoS settings.
2.Select the interface.
3.Select the Default CoS value from the list in the provided field in the first row.
4.Check or uncheck the Restore Defaults box in the interface entry row.
Configuring QoS |
v1.0, December 2007
