GS700TP Smart Switch Software Administration Manual
–Permanent – The MAC address is permanent.
–Delete on Reset – The MAC address is deleted when the device is reset.
–Delete on Timeout – The MAC address is deleted when the Address Aging Interval expires.
–Secure – The MAC Address is defined for locked interfaces.
2.Select the address table entry.
3.Enter the MAC Address and Interface in the provided fields in the first row.
4.Select the MAC Address duration period Status from the list in the provided field in the first row.
5.Click Apply to update the device.
Dynamic Addresses
The Dynamic Addresses screen contains information about the aging time before a dynamic MAC address is erased.
To configure the Dynamic MAC Address table:
1.Click Switching > Address Table > Advanced > Dynamic Addresses. The Dynamic Addresses screen displays:
Figure
The Dynamic Addresses screen contains the following field:
•Address Aging – Enter the amount of time the MAC address remains in the Dynamic MAC Address table before it is timed out if no traffic from the source is detected. The range is 10 - 630 seconds. The default value is 300 seconds.
2.Enter the Address Aging in the provided field in the first row.
3.Click Apply to update the device.
Configuring Switching Settings |
v1.0, December 2007
