GS700TP Smart Switch Software Administration Manual

To define the active image:

1. Click Maintenance > File Management > Active Image. The Active Image screen displays:

Figure 8-5

The Active Image screen contains the following fields:

Active Image – Displays the image file which is currently active on the unit.

After Reset – Select the image file that is active after the specific unit is reset. The possible field values are:

Image 1 – Activate Image file 1 after the device is reset.

Image 2 – Activate Image file 2 after the device is reset.

2.Select the image file to be active in the After Reset provided field in the first row.

3.Click Apply to update the device. You must reset the device for the active image setting to take effect. See “Reset” for detailed instructions on resetting the device.

Troubleshooting

The Troubleshooting menu contains the following option:

“Diagnostics”

Diagnostics

The Diagnostics menu contains the following option:

“Cable Test”

8-6

Maintenance

v1.0, December 2007

Page 180
Image 180
NETGEAR GS700TP manual Troubleshooting, Diagnostics