GX2411ci English I/B ver. 09010A-1

TROUBLESHOOTING

SYMPTOMS

 

 

POSSIBLE SOLUTION / CAUSE

No dial tone

Check that the telephone line cord connectors at both ends

 

 

are pushed in firmly until they click.

 

If you had a power failure or had unplugged the base unit,

 

 

replace the handset on the base unit for two to five seconds

 

 

to reset the system.

Does not ring

Check the RING ON/OFF switch on the handset. Set to the

 

 

RING ON position to enable the handset ringer.

 

Check that the telephone line cord connectors at both ends

 

 

are pushed in firmly until they click.

 

You may have exceeded the Ringer Equivalence Number

 

 

(REN) limit of how many phones can be connected to the

 

 

same line. The REN total of all devices (printed on the

 

 

bottom label of each unit) should not exceed five (5).

 

 

Disconnect the appropriate units to lower the REN total.

No power on the

Check

the Ni-Cd battery pack for proper connection inside

handset unit

 

the battery compartment on the handset.

 

The handset rechargeable Ni-Cd battery pack may need

 

 

charging.

Does not charge

Check

the Ni-Cd battery pack for proper connection inside

 

 

the battery compartment on the handset.

 

The charging contacts and terminals may need cleaning

 

 

with an alcohol-dampened swab.

Range is limited

Move the base unit so that it is centrally located in your

 

 

residence or office and make sure that the base unit is not

 

 

located near appliances.

 

The handset Ni-Cd battery may be weak. Recharge the Ni-

 

 

Cd battery.

09010A-1

 

 

30

OWNERS MAN # GX2411ci VER. 09010A-1

PAGE:

30

English version

Page 31
Image 31
Audiovox GX2411ci manual Troubleshooting, Symptoms Possible Solution / Cause