Answering Machine Operation, Auto Channel Scan

BASE CALL

OUT OF RANGE

GX2411ci English I/B ver. 09010A-1

In some cases, such as PABX or long distance service, a pause may be needed in the dialing sequence. Pressing the RE/PA button inserts a four-second delay between dialed numbers.

FLASH FUNCTION

Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your local phone company. Flash can also be used to restore a dial tone to make a new call.

CHANNEL SELECTION (40 Channels)

A.AUTO CHANNEL SCAN

When you place or receive a call and handset TALK button is pressed, the GX2411CI auto-scans for a clear channel.

Once it finds a clear channel, the handset LCD Display symbol will light steadily.

B.MANUAL CHANNEL SCAN

If the existing channel becomes noisy or starts having interference, you can either move closer to the base unit

or press the SCAN/PRG button on the handset until better (Figure 16) reception is found.

OUT OF RANGE WARNING

The handset and base unit communicate up to a certain maximum range. The distance can be affected by weather, power lines, or even other cordless telephones.

If you are far away from the base unit, the handset beeps and "OUT OF RANGE" is shown on the LCD display to warn you that the background noise level is too high for proper communication between the handset and the base unit.

When you hear this sound and see the "OUT OF RANGE" display, you should move closer to the base unit. Otherwise, the call will automatically cut off after 30 seconds.

LOW BATTERY WARNING

When the handset battery voltage level is low, the handset LOW symbol is shown on the LCD Display.

Return the handset on the base cradle to charge.

PAGING FUNCTION

If you have misplaced the handset or need to alert the person nearby the handset, press the PAGE button on the base unit. Each press of this button will activate the handset to beep for 30 seconds and LCD Display shows "BASE CALL" while it is being paged by the base unit.

NOTE: Even if the handset is in RING OFF mode, the base unit can page the handset.