Audiovox GX2411ci manual Memory Full

GX2411ci English I/B ver. 09010A-1

	∙ Refer to the section "Improving Cordless Reception".
Interference on	∙ Choose an alternate channel using the SCAN button on the
reception	handset.
	∙ Refer to the section "Improving Cordless Reception".
Cannot access	∙ The password you have entered may be incorrect. Enter the
Remote Operation	correct password during OGM playback or within 7 seconds
	after the OGM has finished playing.
Excessive static	∙ Refer to the section "Improving Cordless Reception".
Incoming calls/ Memo	∙ The GX2411CI will stop recording after 7 seconds of
messages are cut off	continuous silence or 7 seconds after the caller hangs up
	(VOX feature).
	∙ Each incoming message recording is limited to two minutes
	to conserve message storage space.
Announces	∙ The 15-minute recording limit may have been reached.
“Memory Full ”	Erase old messages to make room for new messages.
The Caller ID panel is	∙ Check the power connection.
blank	∙ Check the telephone line cord connections.
	∙ Check the batteries for proper installation.
The Caller ID does not	∙ The Caller ID unit will not function until you have Caller ID
show the caller's	service provided by your local phone company. Call your
name and / or phone	local phone company to have Caller ID installed on your
number.	telephone line.
	∙ If you pick up the phone before the second ring, the caller
	information will not be correctly received. If you have
	telephone answering device (TAD) connected with the unit,
	set the TAD to answer after two ring s or more.
	∙ If it is a blocked call or an out-of-area call, the caller's name
	and / or phone number will not appear on the display.
	∙ If only the caller's phone number appears on the display, it
	may be a Single Data Message Format (SDMF) call, as
	opposed to a Multiple Data Message Format (MDMF) call.
	Please call your local phone company to see which service
	you have.
Random characters	∙ On rare occasions, the Caller ID information sent by the
and / or "NO DATA"	telephone company may have an error in the transmission.
appear on the LCD	This is not the fault of your Caller ID unit. It can only capture
Display.	and store the data that was received.
Cannot get Call	∙ Subscription to Caller ID Call Waiting (CIDCW) is required
Waiting identification	from your local phone company for the CIDCW function to
on the LCD Displayl.	operate properly. Call you local phone company for details.

31 09010A-1

OWNER’S MAN # GX2411ci VER. 09010A-1

PAGE: 31 English version