GS700TP Smart Switch Software Administration Manual

To define bandwidth settings:

1.Click QoS > CoS > Basic > Bandwidth. The Bandwidth screen displays:

Figure 5-4

The Bandwidth screen contains the following fields:

Interface – Displays the ports for which the bandwidth settings are displayed.

Ingress Rate Limit Status – Select whether rate limiting is defined on the interface. The possible field values are:

Enable – Enable ingress rate limiting on the interface.

Disable – Disable ingress rate limiting on the interface.

Ingress Rate Limit – Enter the rate limit in kilobits per second. The possible field range is 3500 to the maximum port speed. GE ports have a maximum speed of 1000000 kilobits per second. The default value is 3500 kilobits per second.

Egress Shaping Rates Status – Select whether egress shaping is defined on the interface. The possible field values are:

Enable – Enable egress shaping rate on the interface.

Disable – Disable egress shaping rate on the interface. This is the default value.

5-6

Configuring QoS

v1.0, December 2007

Page 120
Image 120
NETGEAR manual GS700TP Smart Switch Software Administration Manual