GS700TP Smart Switch Software Administration Manual
Work Area – Located on the right side of the NETGEAR GS700TP web browser interface and marked as 3 in Figure
For further description of the functions, refer to the appropriate section of this manual:
•Chapter 3, “Managing System Settings” describes how to configure the System functions.
•Chapter 4, “Configuring Switching Settings” describes how to configure the Switch functions.
•Chapter 5, “Configuring QoS” describes how to configure QoS functions.
•Chapter 6, “Managing Security” describes how to configure security.
•Chapter 7, “Monitoring the Switch” describes how to configure monitoring functions.
•Chapter 8, “Maintenance” describes maintenance functions, such as firmware upgrade.
•Chapter 9, “Online Help” describes how to obtain online help and support.
Using the NETGEAR Web Management System Options
The GS700TP web browser interface provides the following options:
•Device Management Buttons – Provides an explanation of the management buttons in the NETGEAR GS700TP Smart Switch.
•Informational Services – Provides access to informational services including technical support, online help and device information.
•Using Screen and Table Options – Provides an explanation of specific GUI characteristics and tables for configuring the device.
Device Management Buttons
The NETGEAR GS700TP Smart Switch web browser GUI management buttons allow network managers to easily configure the device from remote locations. The management buttons are shown below:
Table 1: | Device Management Buttons |
| |
Button Name | Description |
| |
|
|
|
|
ADD |
| Adds information to tables or information windows. |
|
|
|
|
|
APPLY |
| Applies configured changes to the device. |
|
|
|
|
|
CANCEL |
| Cancels modifications to tables or information windows. |
|
|
|
| |
|
|
|
|
Introduction to the Web Browser Interface | |||
v1.0, December 2007
