GS700TP Smart Switch Software Administration Manual
–Up – The LAG is currently linked and forwarding traffic.
–Down – The LAG is currently not linked.
•Reactivate Suspended – Select the action to apply to a suspended LAG. The possible field values are:
–Enable – Reactivate the suspended LAG.
–Disable – Do not reactivate the suspended LAG.
•Type – Displays the LAG type. The possible field values are:
–Static – The LAG is configured manually.
–LACP – The LAG is configured automatically.
•Speed – Select the data transmission rate for the LAG. The LAG type determines what speed setting options are available. The possible field values are:
–10M – The LAG is currently operating at 10 Mbps.
–100M – The LAG is currently operating at 100 Mbps.
–1000M – The LAG is currently operating at 1000 Mbps.
•Duplex Mode – Displays the duplex mode of the LAG. The possible field value is:
–Full – The interface supports transmission between the device and its link partner in both directions simultaneously.
•Auto Negotiation – Select the auto negotiation status of the LAG. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by default. The possible field values are:
–Enable – Enable auto negotiation.
–Disable – Disable auto negotiation.
•Flow Control – Select the flow control status of the LAG. Operates when the LAG is in full duplex mode. Flow Control is disabled by default. The possible field values are:
–Enable – Enable flow control.
–Disable – Disable flow control.
2.Select the interface.
3.Enter or modify the fields in the first row.
4.Click Apply to update the device.
Configuring Switching Settings |
v1.0, December 2007
