Perle Systems SCS, STS manual Internet Address, Permissions, User V3 Read-Write, Security Level

Management

Internet Address	The IP address of the SNMP manager that will send requests to the IOLAN. If
	the address is 0.0.0.0, any SNMP manager with the Community name can
	access the IOLAN. If you specify a network address, for example
	172.16.0.0, any SNMP manager within the local network with the
	Community name can access the IOLAN.
	Field Format: IPv4 or IPv6 address
Permissions	Permits the IOLAN to respond to SNMP requests.
	Data Options:
	z None—There is no response to requests from SNMP.
	z Readonly—Responds only to Read requests from SNMP.
	z Readwrite—Responds to both Read and Write requests from SNMP.
	Default: None
V3 Read-Write	Specified user can view and edit SNMP variables.
User
V3 Read-Write	Select the security level for the Read-Writer user. This must match the
Security Level	configuration set up in the SNMP manager.
	Data Options:
	z None—No security is used.
	z Auth—User authentication is used.
	z Auth/Priv—User authentication and privacy (encryption) settings are
	used.
	Default: None
V3 Read-Write	V3 Specify the authentication algorithm that will be used for the read-write user.
Auth Algorithm	Data Options: MD5, SHA
	Default: MD5

V3 Read-WriteType in the read-write user’s authentication password.

Auth Password

V3 Read-WriteRetype the user’s authentication password.

Confirm Password

V3 Read-WriteSpecify the read-write user’s privacy algorithm (encryption). Privacy Algorithm Data Options: DES, AES

Default: DES

V3 Read-WriteType in the read-write user’s privacy password.

Privacy Password

V3 Read-WriteRetype the privacy password.

Confirm Password

V3 Read-Only User Specified user can only view SNMP variables.

V3 Read-OnlySelect the security level for the Read-Only user. This must match the

Security Level configuration set up in the SNMP manager.

Data Options:

zNone—No security is used.

zAuth—User authentication is used.

zAuth/Priv—User authentication and privacy (encryption) settings are used.

Default: None

293