Perle Systems STS, SCS manual Installing a Perle PCI Card

Installing a Perle PCI Card

2.Unscrew the four screws along the bottom of the serial side of the SCS IOLAN. On the SCS

8-port/16-port/32-port models, this includes the screw that is at the bottom of the PCI face plate.

3.Slide the top of the IOLAN off of the chassis.

4.Carefully holding the bracket just behind the face plate, unscrew the two screws at the top of the 8-port/16-port/32-port removable face plate or the two side screws of the 48-port removable face plate of the piece you just took off.

32-port model 48-port model

The 8-port/16-port/32-port models are displayed below with the face plate and bracket taken apart.

5.Unscrew the screw in the bracket. The 8-port/16-port/32-port bracket is shown below.

6.Slide the PCI adapter card into the bracket.

32-port model 48-port model

380 IOLAN SDS/SCS/STS User’s Guide, Version 3.6