Perle Systems STS, SCS Pulse Mode, Pulse Count, Inactive Signal Width Active Signal Width, Delay

Channels

Pulse Mode	When Output is set to Pulse, you can specify the manner of the pulse.
	Data Options:
	z Continuous—Continuously pulses active and inactive.
	z Count—Pulses an active/inactive sequence for the specified number of
	times.
	Default: Continuous
Pulse Count	The channel output will pulse for the specified number of times; each count
	consists of an active/inactive sequence.
	Default: 1

Inactive Signal Width

Active Signal Width

How long the channel will remain inactive during pulse mode. Range: 1-9999 x 100 ms

Default: 1 (100 ms)

How long the channel will be active during the pulse mode. Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Delay	How long to delay an active-to-inactive or inactive-to-active setting after it is
	manually started.
	Range: 1-9999 x 100 ms
	Default: 1 (100 ms)
Failsafe Action	When there has been no I/O activity within the specified time (set in the I/O
	Interfaces, Settings on the Failsafe Timer tab) and the Failsafe Timer is
	triggered.
	Data Options:
	z None—The state of the Digital/Relay output remains the same, no change.
	z Activate Output—Activates the channel.
	z Deactivate Output—Deactivates the channel.
	Default: None

250 IOLAN SDS/SCS/STS User’s Guide, Version 3.6