Adding/Editing Users

Services Tab

Overview

The Services tab configures the connection parameters for a user. Any connection parameters configured in this window will override the serial port connection parameters.

Functionality

When a Terminal profile is set for the serial port and Require Login has been selected, user’s accessing the IOLAN through the serial port will be authenticated. Once authentication is successful, the Service specified here is started. For example, if the Service Telnet is specified, the IOLAN will start a Telnet connection to the specified Host IP/TCP Port after the user is successfully authenticated (logs in successfully).

Within the Terminal profile, there are a number of settings that apply to possible Services. Once it is known which user is connected, and which service is to be used, then the settings from both the Terminal profile and the user are used. User parameters take precedence over serial port parameters.

Field Descriptions

Configure the following parameters:

Service

Used in conjunction with the Terminal Profile. After the user has successfully

 

been authenticated, the specified service is started.

 

Data Options: DSPrompt, Telnet, SSH, RLogin, SLIP, PPP, TCP Raw, SSL

 

Raw

 

Default: DSPrompt

Host IP

When the User Service is set to Telnet, RLogin, SSH, or TCP Clear, the target

 

host IP address. If no IP address is specified, the Host IP value in the Default

 

User configuration will be used.

 

Default: None

195

Page 195
Image 195
Perle Systems SCS, STS manual Services Tab, Default DSPrompt, Host IP